1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG354G + ISP Speedlinq

Discussion in 'Other Linksys Equipment' started by djjeffrey, Apr 26, 2006.

  1. djjeffrey

    djjeffrey LI Guru Member

    Hi there,

    Anybody here using these combination:

    WAG354G + WMP54G
    ISP: speedlinq
    Country: The Netherlands

    Connections drops from time to time, changed to channel 11
    and tried also channels: 6 and 9 seems to be having the same problems, changing beacon interval from 100 to 60 and 40 also not working, changing threshold settings to 2304 will completly losing my connection with the wag354g and only setting to factory will fix the connection with the pc...



    Jeffrey van Beek
  2. booly

    booly Network Guru Member

    The drops acn also be link to you pc wireless card!

    I've seen this you a pcmcia wifi card
  3. djjeffrey

    djjeffrey LI Guru Member

    Hi, No i am not using any pcmcia card for wireless networking or the internet, we use two WMP54G pci cards and a WAG354G router/modem.

    All cards/modems are setup with 802.11G settings on channel 11
    and are working correct, but somethimes a lot of disconnects without losing signal since this is allmost 90% somethimes 85% but not less...

Share This Page