1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG54G Help, please?

Discussion in 'Other Linksys Equipment' started by Geforcer, Jan 6, 2011.

  1. Geforcer

    Geforcer Networkin' Nut Member

    Hello, guys!
    I'm newly registered here, but I have been reading this forum for a while back. I would be very grateful if you could help me solve my problem....

    I have WAG54G v1 and when I turn it on, the lamps light up, they blink and when they should go steady, the router restarts and they blink again. And that goes on repeatedly. I can't access the router from FTP, there is no connection. What's wrong with it and how can I solve it?

    Thank you in advance!
  2. mstombs

    mstombs Network Guru Member

    Could be hardware, must be pretty old! Check the PSU by swapping with similar one - on others of similar type capacitors around the switch fail - the first symptoms of which are inability to connect at 100Mb/s, but 0mb/s works for a while.

Share This Page