1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wag54g setup

Discussion in 'Other Linksys Equipment' started by Anonymous, Jul 10, 2004.

Thread Status:
Not open for further replies.
  1. Anonymous

    Anonymous Guest

    I have a problem with the ( http://192.168.1.1) on IE6 it will not work for me to setup the system? I need help.
    Paul
     
  2. Morpheus

    Morpheus Network Guru Member

    try 192.168.1.245

    1.1- Setup your system to access AP’s HTML interface
    - Fix the IP address & Gateway in the Network Properties. If your Gateway address is 192.168.1.245 (default) the IP address must be defined in the same subnet ie: 192.168.1.100

    [​IMG]

    2.-Open your Web Browser, enter the AP Gateway IP address in the address field, press Enter. You’ll be prompted to enter your User Name and Password.
    User Name = <blank>, Password = admin by default.
     
  3. yonnage

    yonnage Network Guru Member

    accessing a WAG

    The correct address for a WAG54G is http://192.168.1.1. Am I correct in saying that 192.168.1.245 is the default IP address for a WAP54G??

    Try a reset on the WAG and then try accessing again. Check what you IP address is, it should be in the range 192.168.1.x If its not set a static address, but not the ip address in the previous reply, as that is the first DHCP assigned address, and can cause a conflict if you have more than 1 pc.

    Also try going to internet option in control panel and select never dial a connection on the connections page. On that same screen click on LAN settings and make sure that only the top box is ticked. OK out of the settings and close any web browsers

    try accessing the web page again.
     
  4. Anonymous

    Anonymous Guest

    WAG54G

    I would like to thank you all for your help I am now up and runner thank again

    Paul
     
Thread Status:
Not open for further replies.

Share This Page