1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG54G V1 user name and password problem

Discussion in 'Other Linksys Equipment' started by Koppa, Feb 17, 2007.

  1. Koppa

    Koppa Guest

    Hey guys,

    Hoping someone here will be able to know how to fix this problem with my WAG54G V1.

    I have just changed ISP and was having some issues trying to setup my router.

    I grabbed the instructions off the ISP page for my router and everything was going fine until I pressed the save settings button after making the changes.

    It came up with a user name and password box, so I entered my admin and password (which I used to get access to the router in the first place) and it didn't work. Tried everything I could think of and nothing would work.

    I then did a hard reset of the router thinking that there must be something wrong and once again it came up with the same problem.

    I have narrowed it down to a couple of things now.

    First off, if I change the router to PPPoA, the user name box will come up. However, if I leave it at PPPoE, it works fine and allows me to change all the settings.

    Since I have now also reset the router, I tried to add back the port forwarding I had for eMule and after putting those details, the same user name box appears.

    So is there anyone out there who has experienced the same problems with this router and have some ideas on how to fix it?

    At the moment I am running on PPPoE, but would be nice to be able to change to PPPoA (if this is preferred by the ISP) and be able to port forward as well.

    I am currently running firmware 1.02.9.

    Cheers
     
  2. Eng_RS

    Eng_RS LI Guru Member

    I have same problem and try to change firmware, and notinhg.

    Some one can help me?
     
  3. Eng_RS

    Eng_RS LI Guru Member

    With the help of HiSpeed i solve the problem.

    The solution is try with other PC.


    Thanks all
     

Share This Page