1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wag54g v2 1.02.02 firmw request

Discussion in 'Linksys Official Firmware' started by Skywalker, Aug 26, 2006.

  1. Skywalker

    Skywalker Network Guru Member


    is it possible to have this firmware compiled?

    i know that there is the gpl version, but i can't compile it.

    the firmware 1.02.00 makes my router do "mosquitos" sound, so i want to try with a newer one.

  2. djbill

    djbill Network Guru Member

    Please compile by us.

    Thanks in advance.
  3. Toxic

    Toxic Administrator Staff Member

    The only people who can compile this is linksys. ask them

    what version of WAG do you have v1? v2? AnnexA? or AnnexB?
  4. Skywalker

    Skywalker Network Guru Member

    v2 annexA
  5. Frans B

    Frans B LI Guru Member

    I have this version : WAG54GV2-AU_AnnexA_ETSI_v1.02.03_001_code.bin

    where can i send it to ?
  6. Skywalker

    Skywalker Network Guru Member


    where did you get it? does it work well or bad?

    please tell us all about new firmware :D

  7. Frans B

    Frans B LI Guru Member

  8. Skywalker

    Skywalker Network Guru Member

    ah, it is for australian routers, i need EUrope version.

    anyway thanks
  9. whynot

    whynot Addicted to LI Member

    The similar problem


    Mine is Wag54G V2,
    It worked well except something tiny noise before I did upgrade the firmware "WAG54GV2-AU_v1.02.13-Pluto".

    After I did the upgrade, it doesn't work anymore.
    So i want to reflash the firmware, I have get some confused by the replies in some topics, so,
    1, which version shall i apply for?
    2, Wag54g V2, where shall I download the firmware Linksys-Au or Linksys-UK,or some other place? It seems that when I sort the same Wag54g V2 the different version I will get.

    For example:
    Linksys-Au ---get result---->WAG54GV2-AU-AnnexA-FCC-v1.02.20-code
    Linksys-UK ---get result--->WAG54G-UK_v2_ETSI_1_01_15

    Here is the information of the former firmware (works well)

    Firmware Version:1.02.20 , Oct 17 2006
    Boot Version:0.22.14

    DSL DSP Datapump version: [] Annex A
    DSL VPI/VCI:8/35

    RF Status:enabled
    RF Firmware Version:
    RF Domain:ETSI (channel 1~13)
    RF Channel:11
    RF SSID:Linksys

    -----Dynamic Information
    RF Mac Address:00-18-39-5D-EC-6F
    LAN Mac Address:00-18-39-5D-EC-6F
    WAN Mac Address:00-18-39-5D-EC-70
    Hardware Version:00.0000
    Fast Mode Downstream Rate:1504 kbits/s
    Fast Mode Upstream Rate:128 kbits/s
    CRC Up:0
    CRC Dn:0

Share This Page