1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG54G V2 and Cisco PIX 501

Discussion in 'Networking Issues' started by dribble, Apr 25, 2005.

  1. dribble

    dribble Network Guru Member

    Hi guys,

    wondered if anyone has tried the following before?

    remote pc xp (private ip "x") > (private ip "x") WAG54G V2 (static public ip) > internet > (static public ip) WAG54G V2 (static private "y" ) > PIX 501 (static private "y") > w2k3 server (static private "z")

    I want to be able to create a VPN tunnel so that the remote pc can see files on the server.

    Can the WAGs have a tunnel between them?
    Can the remote WAG build a tunnel to the Cisco PIX
    Should the remote client use the cisco vpn client software to the pix
    Should the remote client use windows vpn client to the server?

    Regards

    Lee
     
  2. dribble

    dribble Network Guru Member

    Quiet on the answer front

    Update:
    I have managed to get from inside the pix to the WAG54G and onto the internet. So basic IP connectivity is in place.

    I know that the WAG54G V2 is not a router, but is there a way of adding a "static route" or all protocol forwarding to a specific IP address?

    Regards

    Lee
     
  3. dribble

    dribble Network Guru Member

    A Link for newbies?

    Hi Guys,

    in the course of trying to get a solution I talked to Linksys support.
    They were unable to help, but did give me a link to a website that others might find helpful:

    http://www.linksys.com/support/troubleshoot

    <first time may come back - not authorised, but try it again and it seems to let you through>

    Lee
     

Share This Page