WAG54G-WAG54G VPN

Discussion in 'Other Linksys Equipment' started by mvdriel, Jun 6, 2005.

  1. mvdriel

    mvdriel Network Guru Member

    Hi all,
    I'm trying to setup a VPN between two WAG54G routers.
    The tunnels are connected and I can ping and reach both modems from either location. However, when I am trying to reach a remote computer this will not work.

    Setup below:

    WAG54G 1:
    Local secure group: 192.168.1.0 / 255.255.255.0
    Remote secure group: 10.0.0.0 / 255.255.255.128
    Remote security gateway: remote WAN-IP

    WAG54G 2:
    Local secure group: 10.0.0.0 / 255.255.255.128
    Remote secure group: 192.168.1.0 / 255.255.255.0
    Remote security gateway: remote WAN-IP

    So, when at location 1, it is possible to ping and setup the router at location 2 via ip-address 10.0.0.1, and vice-versa..
    Any suggestions?
     
  2. DocLarge

    DocLarge Super Moderator Staff Member Member

    Exactly what do you mean "setup a router" from location one?

    Doc
     
  3. mvdriel

    mvdriel Network Guru Member

    Resolved!

    The problem solved itself strangely after a reset of the routers and computers... Tried that one before, but now it worked.

    Thanks for trying to help me, doc!
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice