Wake On LAN WRT54G??

Discussion in 'Cisco/Linksys Wireless Routers' started by Cpudan80, Jan 2, 2006.

  1. Cpudan80

    Cpudan80 Network Guru Member

    Hello Everyone:

    Anyone know how I can get WOL to work with a WRT54G router (across a WAN)? I've got my WOL program to braodcast it's packet thing accross port 6000 to my router.

    From there, I need to basically enable port forwarding, and forward this packet to 192.168.1.255 - but it seems that the range is [0 - 254], and so I can't setup the forward.

    I called linksys, they said use 254 because it was "the end of the range". Tried to tell them that 255 is the broadcast address and is used for WOL - but they wouldn't buy it.

    So - anyone know how I can do this? I've got a WRT54G v2 with the latest Linksys Firmware...

    Thanks in advance!

    Dan
     
  2. Chuck_IV

    Chuck_IV Network Guru Member

    I think you may need 3rd party firmware for this. I know Thibor has a firmware version(which is normally for the GS) which supports it. Tofu's version(which is for the G) may also, but I don't know. You can check here: www.hyperwrt.org and see.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice