1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WakeOnLan with HyperWRT2.1b1 4.20.6 Rupan's build possible??

Discussion in 'HyperWRT Firmware' started by LeChuck, Nov 9, 2005.

  1. LeChuck

    LeChuck Network Guru Member

    Hello guys,

    I was wondering if it was possible to somehow utilize WOL over the Internet with HyperWRT2.1b1 on 4.20.6 Rupan's build? Can I somehow put a script in the startup-scripts-section that would allow me this?

    I found this on the internet:
    ----------------------------------------------------------------------------------------------------------------------
    I have solved the WOL functionality for nearly all linux setups. Populart WRT54G(S) series are prime example. To make real WOL functional - do the following:

    1) Make a port forward to your LAN ip 192.168.0.254 (no PC can use this IP in LAN) udp port 150 for example (it really can be any port as your WOL pc does not care what port the traffic arrives)

    2) add this to your startup scripts:
    ip neigh change 192.168.0.254 lladdr ff:ff:ff:ff:ff:ff nud permanent dev br0
    ip neigh add 192.168.0.254 lladdr ff:ff:ff:ff:ff:ff nud permanent dev br0
    -----------------------------------------------------------------------------------------------------------------------

    Will that work with my version of HyperWRT (2.1b1 Rupan 4.20.6) ???

    I want that feature so much!!!!! Would probably save me quite some money on my power bill... hehe... Turn on the machine only when there is good stuff to download... ;)

    Thanks and best regards,

    LeChuck
     

Share This Page