Ok, I had a domain and hostname set for the WAN side of my WRT54GL using TOMATO firmware 1.17. I changed it, but it won't recognize the new one and I can still type the oldurl and hostname in and get to the admin page. This is not a browser cache issue as I have tried to access the page from multiple browsers, platforms, and networks all with the same results. Is there a way to change the router's hostname via command line. I telnetted in and tried using the command: hostname newhostname (not really my new hostname ) to no avail. There is no hostname command or any normal busybox commands I am used to. In summation, I want to access the router with http://newhostname instead of http://oldhostname Both are fowarded from my DNS servers correctly as I can ping and get a response from my WAN IP.