1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wan / Internet IP

Discussion in 'Tomato Firmware' started by NooZes, Oct 8, 2007.

  1. NooZes

    NooZes LI Guru Member

    Hi mates!
    This is my first post on this forum :biggrin:
    Well, I've checked in few versions of tomato that when I try to put the WAN/Internet static IP instead dhcp, he puts automatically 0.0.0.0, and submask too!
    This happen just to me?
    Thanks in advance :)
    best regards

    PS: Tomato - best alt firmware to WRT
     
  2. GeeTek

    GeeTek Guest

    You need to fill in the correct values for subnet mask. It is not always the same for every system.
     
  3. NooZes

    NooZes LI Guru Member

    But I insert the correct IP and submask of the network and when I save it return to 0.0.0.0, but the second time that I go to basic-network and insert again the values, he save with the righ ip's.

    My question is why he cannot set that values at the first time :)

    Best regards!
     
  4. GeeTek

    GeeTek Guest

    Sounds like a browser problem. My subnet mask saves the first time I change it with IE 6.
     

Share This Page