1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Want to switch from thibor to Tomato but...

Discussion in 'Tomato Firmware' started by Moosh, Apr 19, 2007.

  1. Moosh

    Moosh Network Guru Member

    The firewall script in Thibor is useful. Is there an equivalent in Tomato? I have seen mention of a script in the FAQ but is that a single line command type thing?
    I've asked another question(in the Hyperwrt forum) about the script I am using (don't laugh...it's the first one I've written, well copied most of it) If not, can I edit the equivalent of the thibor ipt or rc.firewall with SCP? Or could that lock me out of the WRT54GS?
  2. GhaladReam

    GhaladReam Network Guru Member

    There is a section in Administration-->Scripts in Tomato that allows you to put in a custom firewall script. Any script that works in Thibor should also work in Tomato!

    Happy flashing.
  3. Moosh

    Moosh Network Guru Member

    Yeah, I already flashed Tomato again and found the script page. Thing is, I can't find the equivalent of the ipt file in Hyperwrt, so cannot see how my rules clash with default ones. I can't change the default for FORWARD and OUTPUT to DROP for example. also, NTP is blocked and trying:
    iptables -A OUTPUT -p udp -s x.x.x.x --dport 123 -m state --state NEW,ESTABLISHED -j ACCEPT doesn't help.
    I don't want to flush the default rules, cause I don't know enough about iptables to that
    Very impressive firmware though, I've tried DD-WRT ,Thibor and this is by far the best.

Share This Page