1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAP200 v1.00.20 Beta Firmware (ETSI)

Discussion in 'Other Linksys Equipment' started by Toxic, Sep 2, 2007.

  1. Toxic

    Toxic Administrator Staff Member

    WAP200 Firmware Release Note. Version: 1.00.20: (ETSI - EUROPEAN)

    Enhancements:
    1. Add VLAN filter to drop traffic from VLANs other than the one mapped to a certain SSID.
    Bug fixes:
    1. When more than two SSID is configured, some client cards might exist difficulty on connecting to AP.
    2. Fix the issue that PING will be flooded after running multiple APs w/ multiple BSSID configured for a couple days.
    3. When VLAN is configured, remote management to AP cannot be established.
    Known issues:
    1. WDS Bridge can cause TCP checksum error on some packets which might result in HTTP session failure.
    2. WLAN client on different VLAN can access web UI through a router even if wireless access is disabled.
    3. The first SSID always has highest default priority no matter CoS settings.

    Version: 1.00.14:


    Known issues:
    • When more than two SSID is configured, some client cards might exist difficulty on connecting to AP. By reducing the number of SSID first can work around this issue.
    get the firmware here: WAP200 ETSI Firmware
     

Share This Page