1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAP54G 2.07 6/1/2004

Discussion in 'Linksys Official Firmware' started by jdepew, Jul 25, 2004.

?

Firmware Functionality

  1. Works very well

    98.7%
  2. Works well but some issues

    1.3%
  3. Works occassionally

    0 vote(s)
    0.0%
  4. Serious problems but some parts work

    0 vote(s)
    0.0%
  5. Firmware crashes device

    0 vote(s)
    0.0%
  1. jdepew

    jdepew Administrator Staff Member Member

    http://www.linksys.com/download/firmware.asp?fwid=206

    Linksys, A Division of Cisco Systems, Inc.

    Product: WAP54G

    Classification: Firmware Release History

    Release Date: 06/01/04

    Last Firmware Version: v2.07, April 28, 2004
    __________________________________________________________________________
    Version 2.07, April 28, 2004
    - Adds Linksys Wireless Guard support

    Note:WPA does not work in Wireless Bridge/Repeater mode in this release
    Attention: Before upgrading to fw 2.07, make sure your AP's current firmware is 1.09.1

    Version 2.06, December 16, 2003 (ver.2 initial release)
    - Updated User Interface format and layout
    - Updated wireless driver to support all versions of WAP54G hardware
    - Adds AP Client Mode
    - Adds Wireless Repeater Mode for WAP54G and WRT54G (requires fw 2.02.2 or above)

    Note:WPA does not work in Wireless Bridge mode in this release

    Version 1.09.1, Dec 1, 2003
    - Fix: Backup/Restore Settings from one AP to another AP
    - Performs OS upgrade (for v1 and v1.1 only)

    Version 1.08, August 5, 2003 (ver.1 & 1.1 only)
    - Complies with final 802.11g standard
    - Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption
    - Adds UI control to enable/disable frame bursting
    - Adds UI control for antenna selection
    - Added "B-Only" option to wireless modes
    - Added "Default" option to Basic Rate settings

    Note:WPA does not work in Wireless Bridge mode in this release

    Version 1.06, February 18, 2003 (ver.1 only)
    - Improves Stability and Performance
    - Improves Performance in mixed environment
    - Improves compatibility with Legacy Client Adapter
    - Fix Event Log (Records client MAC Address)
    - Fix Bridging with WAP11 on some channels

    Version 1.05 (ver.1 only)
    - Initial Release

    Note: Please make sure to reset/reboot the unit after firmware upgrade is complete.
     
  2. Morpheus

    Morpheus Network Guru Member

    NEW Firmware Version : 2.08

    http://www.linksys.com/international/firmware.asp?intfwid=9&coid=6

    Linksys, A Division of Cisco Systems, Inc.

    Product: WAP54G

    Classification: Firmware Release History (European version)

    Release Date: June 10, 2004
    __________________________________________________________________________
    Version 2.08 May 13, 2004 ETSI
    - Fixed problems with firmware not reporting IP properly to the wizard
    - Fixed internal firmware date issue

    NOTE: This firmware and 2.07 firmware are not backwards compatible with older
    wizards. WPA does not work in Wireless Bridge/Repeater mode in this releas

    Version 2.07 March 1, 2004 ETSI (ver.2 initial release)
    - Updated User Interface format and layout
    - Adds AP Client Mode
    - Adds Wireless Repeater Mode for WAP54G and WRT54G (router requires fw 2.02.2
    or above)
    - Access points running 1.0x firmware have to upgrade to 1.09.1 before they
    can be upgraded (filename for 1.09 firmware: osupgrade_for_ver_1_wap54g.trx).

    Note:WPA does not work in Wireless Bridge/Repeater mode in this release



    Version 1.09
    - The firmware file is called osupgrade_for_ver_1_wap54g.trx
    - Updates the OS on the Access points running older firmware so they can be
    upgraded to the 2.07 firmware. NOT A FULL FUNCTIONAL FIRMWARE, REQUIRED FOR
    FUTURE UPGRADES. SIMULTANEOUSLY RELEASED WITH 2.07 firmware

    Note: If you try and upgrade an older unit to firmware 2.08 without upgrading
    the firmware to 1.09.1 prior to upgrade, you may damage the Access Point.


    :wink:
     
  3. Morpheus

    Morpheus Network Guru Member

    P.S This is for the WAP54G-UK/EU
     
  4. zigune

    zigune Network Guru Member

    How can we know if we have a

    WAP54G-UK/EU or another one ?

    What does it makes if we put the 2.08 on another version or if we put the US version on the UK version ???
     
  5. massa

    massa Network Guru Member

    2.08 firmware

    Why is this firmware a .dat-fil and not a .bin-fil ?
     
  6. jonnyv_tm

    jonnyv_tm Network Guru Member

    I keep getting fropped connections , i CANT decide id its the network or the AP. im leaning towards the AP
     
  7. pojo

    pojo Network Guru Member

Share This Page