1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAP54g and DIAG led

Discussion in 'Other Linksys Equipment' started by chris-berlin, May 27, 2005.

  1. chris-berlin

    chris-berlin Network Guru Member

    Hello,
    i have yesterday flashed my WAP54g from 2.08 EU to 2.08 US from the Linksys.com after update is still light the DIAG-Led the router work good. When i flashed to 2.08 EU Version the DIAG Led ist only on when the AP is startet. Is this a Bug in the 2.08 US Firmware ?

    Chris
     
  2. oopsibrokeit

    oopsibrokeit Network Guru Member

    if it works OK, don't worry about it!!

    :)
     
  3. chris-berlin

    chris-berlin Network Guru Member

    Hello,
    It has me somewhat disconcerted why the Diag lamp shines. Thus simply to shine leave and is good.

    Greeting Chris
     
  4. oopsibrokeit

    oopsibrokeit Network Guru Member

    the wap 54 is very sensitive to firmware coding and the slightest little difference to what it expects of the firmware causes the DIAG LED to light up. As you've noticed the EU - US switch makes it do it, also downgrading sometimes, makes it do it and using the mustdie/sveasoft 3rd party Firmware causes it to do that. but all the time it keeps working.
     

Share This Page