1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAP54G SNMP and Logging

Discussion in 'Other Linksys Equipment' started by cqmsupport, Apr 20, 2006.

  1. cqmsupport

    cqmsupport Guest

    Hi,

    I have a Linksys WAP54G v2 Wireless router with the latest firmware, v3.04.

    I have been trying to get some sort of way to monitor the traffic on the router by using SNMP but it doesn't seem to be working. When i run snmpwalk on the router this is the information I get back:

    snmpwalk -v1 -c private 192.168.0.244


    SNMPv2-MIB::sysDescr.0 = STRING: Linux (none) 2.4.20 mips
    SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.1575.1.5
    DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (69150) 0:11:31.50
    SNMPv2-MIB::sysContact.0 = STRING: Wireless Router
    SNMPv2-MIB::sysName.0 = STRING: GHAP00ewq
    SNMPv2-MIB::sysLocation.0 = STRING: ewq
    SNMPv2-MIB::sysServices.0 = INTEGER: 72
    SNMPv2-MIB::sysORLastChange.0 = Timeticks: (0) 0:00:00.00
    SNMPv2-MIB::snmpInPkts.0 = Counter32: 46
    SNMPv2-MIB::snmpOutPkts.0 = Counter32: 46
    SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 0
    SNMPv2-MIB::snmpInBadCommunityNames.0 = Counter32: 0
    SNMPv2-MIB::snmpInBadCommunityUses.0 = Counter32: 0
    SNMPv2-MIB::snmpInASNParseErrs.0 = Counter32: 0
    SNMPv2-MIB::snmpInTooBigs.0 = Counter32: 0
    SNMPv2-MIB::snmpInNoSuchNames.0 = Counter32: 0
    SNMPv2-MIB::snmpInBadValues.0 = Counter32: 0
    SNMPv2-MIB::snmpInReadOnlys.0 = Counter32: 0
    SNMPv2-MIB::snmpInGenErrs.0 = Counter32: 0
    SNMPv2-MIB::snmpInTotalReqVars.0 = Counter32: 57
    SNMPv2-MIB::snmpInTotalSetVars.0 = Counter32: 0
    SNMPv2-MIB::snmpInGetRequests.0 = Counter32: 0
    SNMPv2-MIB::snmpInGetNexts.0 = Counter32: 60
    SNMPv2-MIB::snmpInSetRequests.0 = Counter32: 0
    SNMPv2-MIB::snmpInGetResponses.0 = Counter32: 0
    SNMPv2-MIB::snmpInTraps.0 = Counter32: 0
    SNMPv2-MIB::snmpOutTooBigs.0 = Counter32: 0
    SNMPv2-MIB::snmpOutNoSuchNames.0 = Counter32: 0
    SNMPv2-MIB::snmpOutBadValues.0 = Counter32: 0
    SNMPv2-MIB::snmpOutGenErrs.0 = Counter32: 0
    SNMPv2-MIB::snmpOutGetRequests.0 = Counter32: 0
    SNMPv2-MIB::snmpOutGetNexts.0 = Counter32: 0
    SNMPv2-MIB::snmpOutSetRequests.0 = Counter32: 0
    SNMPv2-MIB::snmpOutGetResponses.0 = Counter32: 0
    SNMPv2-MIB::snmpOutTraps.0 = Counter32: 0
    SNMPv2-MIB::snmpEnableAuthenTraps.0 = INTEGER: disabled(2)

    Is this all the infomation that the router gives out or am I doing something wrong?

    Anyone have suggestions on how I could get better montoring from this type of router?

    Any help would be great!

    Thanks
     
  2. Nautje

    Nautje Guest

    I am getting the same thing to..
    ..I want to use its OID for transmitting uptime reports to a Uptimes Website..
    ..But I guess I am getting the OID wrong or something, I tried about everything..
    ..I know of, including snmpwalk.

    If someone can help, _please_ do :biggrin:

    - Rob
     

Share This Page