1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wap54g v3 - ses - webinterface - tx tweak

Discussion in 'Other Linksys Equipment' started by collen, Sep 1, 2006.

  1. collen

    collen LI Guru Member

    hello ya'll, i was wondering if i could get some little help.
    we have a wap54g v3.1 and would like to:

    - Disable the ses button function compleet (don't want kids to play with it)
    - Disable the web interface for config, from the wlan part (lan is ok for config)
    - and finaly, but least essesial, the tx power boost (hyper that is)

    i found no way for the standard linksys firmware, to disable these things.
    dunno is there an other firmware who can do this, or some sort of hack around ?

    Thx

    Collen :smile:
     
  2. Guyfromhe

    Guyfromhe Network Guru Member

    I don't think many 3rd party firmware actually support the SES button, you could find one that doesn't.

    You could disalbe it from the wlan, but it's a piece of work due to the way linksys has thier wlan setup.
    If you have a good password it shouldn't matter if people can get to it.


    Any 3rd party firmware you get will allow a tx power boost.
     
  3. collen

    collen LI Guru Member

    does some one have experiance with the openwrt firmware ??

    was wondering if the WhiteRussian rc5 is working on a wap54g - v3
    then i can manage all i need.

    Thx & Cheers.

    C
     

Share This Page