1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WARNING - if you open a WRT54GSv2 - there are screws now!

Discussion in 'Cisco/Linksys Wireless Routers' started by SirDracula, Jun 5, 2005.

  1. SirDracula

    SirDracula Network Guru Member

    I tried to open my WRT54GSv2 based on older model instructions and I found out that there are 2 screws now you have to unscrew first. They are in the front (blue) feet, just remove the rubber/plastic covers from the feet and you will see them.

    I, for one, pulled very hard and the screws came right through the 2 little plastic loops that hold them inside. Not a big deal, the router is still pretty solid, it snaps back together pretty well. Anyway, mine is a paper weight now (not because of this, see my other post).

    I guess Linksys is messing with us with the screws ...
  2. SirDracula

    SirDracula Network Guru Member

    One more note, this *may* be the case for the new WRT54gv3 also, if someone else can confirm, I don't have one ...

Share This Page