WDS: Does it work?

Discussion in 'Cisco/Linksys Wireless Routers' started by Fieldmarshall, Feb 13, 2005.

  1. Fieldmarshall

    Fieldmarshall Network Guru Member

    Hello,

    About a month ago, I bought a WAG54G and a WAP54G which was meant to act as a repeater. Because the WAG54G often lost its wireless connection I sent it back and got it replaced with a new one. This new WAG54G had the same problem. As I already had read a lot of bad things about the WAG54G, I decided to use the WAG54G as ADSL modem and bought a WRT54G for the wireless part, but I left the Wireless on the WAG54G enabled (on another channel etc). I set up the WAP54G to repeat the signal from the WRT54G (which is a v2.2 with firmware 3.03.1).
    Since I have the WRT54G, the wireless on the WAG54G has't dropped even a single time, but the signal on the WRT54G now drops every few hours. I thought to switch the roles (the WRT54G repeating the WAP54G), but this isn't possible with the standard frimware. Sveasoft offers this possibility and version 6 seems to be compatible with the WRT54G, vertheless before spending another 50$ (25 for the WRT and I assume I will to be running sveasoft on the WAP54G also) I'd like to know if anyone has such a configuration running, and is it stable?
     
  2. Toxic

    Toxic Administrator Staff Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice