1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WDS help with Firmware Version: v4.71.1, Hyperwrt 2.1b1 + Thibor15c

Discussion in 'HyperWRT Firmware' started by MagicPinball, Apr 25, 2008.

  1. MagicPinball

    MagicPinball Network Guru Member

    I have 2 Linksys WRT54G routers, both flashed with Firmware Version: v4.71.1, Hyperwrt 2.1b1 + Thibor15c. I have not used my second linksys for awhile and just tried to use it and cannot get it to function as WDS. What I am looking for, are instructions on configuring both routers with the Thibor15c firmware loaded. There use to be a very clear instruction that I think Toxic put online awhile ago, but I cannot find them. Can anyone help?
     
  2. JPNARF

    JPNARF LI Guru Member

    Hi MagicPinball,
    The steps:

    Router 1
    1) Go to Wireless Tab -> Select Wireless Mode "Access Point + WDS"
    2) WDS Mode -> Mode "Link with the following"
    3) in Remote Bridges put the MAC Adress of Router 2

    Router 2
    1) Go to Wireless Tab -> Select Wireless Mode "WDS"
    2) WDS Mode -> Mode "Link with the following"
    3) in Remote Bridges put the MAC Adress of Router 1

    Regards !
     

Share This Page