1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WDS links list in tomato?

Discussion in 'Tomato Firmware' started by Deimdos, Jan 5, 2007.

  1. Deimdos

    Deimdos Network Guru Member

    Hi all, it would be very nice to have a list of WDS nodes (signal quality and all this stuff like normal clients) in Device List, something like DD-WRT has. Someday will be implemented this feature? :)
     
  2. njeske

    njeske Network Guru Member

    it's there on my device lists...
     
  3. Deimdos

    Deimdos Network Guru Member

    my device list doesn´t show WDS links... am i the only one with this "problem"?
     
  4. m078

    m078 LI Guru Member

    I don't see a WDS link in the device list.

    But I think that the device list only shows DHCP addresses? I have fixed addresses for my WDS devices (other one is WRT54G running Alchemy 1.0).
     
  5. Deimdos

    Deimdos Network Guru Member

    jeje, after a "factory defaults" to my WAP54Gv1 (bridge mode) now it appears in my device list, but other WRT54GL doesn´t appear in the list, this is very strange...

    EDIT: if I activate DHCP Server in my WRT54GL WDS links (they have DHCP disactivate) disappears from my Device list. Is this a bug?
     
  6. Zaka

    Zaka LI Guru Member

    I was going to post on this myself.....

    I was using a WRT54GL as an AP and the other WRT54GL as a WET and on both sides for the link I had Signal Strengths.

    The WET was listed in the device list of the AP, with it's signal strength,
    and the AP was listed on the Overview (??) Homepage of the WET, with it's signal stength.

    I changed both end points to WDS after reading more of the threads here and now have no signal strength displayed or wireless devices listed.

    Even using the Wireless survey will not find the other WDS point.
     

Share This Page