1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WDS on WAG54G 1.2 - f/w 1.03.0_beta4

Discussion in 'Other Linksys Equipment' started by m078, Jan 18, 2007.

  1. m078

    m078 LI Guru Member

    Trying to enable WDS on my WAG54G 1.2 with 1.03.0 beta4 firmware.

    The WDS settings screen shows enable/disable. When I select enable, it lists spaces for WDS mac addresses Mac 1 to Mac8, but there is no way to enter new addresses.

    Has anyone got WDS working on a WAG54G 1.2? If so, what firmware?
     
  2. m078

    m078 LI Guru Member

    I downgraded to firmware 1.02.7 from Linksys site and WDS is now working.
    Is this the most stable firmware that supports WDS?
     
  3. dotwin

    dotwin LI Guru Member

    Is a 1.03.1 final firmware for the wag54g v1.x Annex -> B <- available? DL?
     
  4. hozkuluz

    hozkuluz Guest

    Thank You ..................................
     
  5. Neo_Giles24285

    Neo_Giles24285 LI Guru Member

    1.03.0 firmware auto discovers the AP's MAC address, i found 1.02.7 to be stable and worked perfectly for me
     
  6. cicciociccio

    cicciociccio Guest

    Hello to all.

    I have a wag54g 1.2 with an old firmware.

    On linksys site, i find only 1.02.1 firmware.

    Can somebody give me a valid url for download 1.02.7 or 1.02.9 firmware?

    Thanks to all.
     
  7. owergumuz

    owergumuz Guest

    WHERE is Download link ?
     
  8. mstombs

    mstombs Network Guru Member

  9. adam.krot

    adam.krot Networkin' Nut Member

    Hi, looking for the proper firmware to v1.2 wag54g. I currently have 1.02.1 but it is unstable. Can someone give me a link or send the adam_krot@wp.pl, thank you
     
  10. sameerz

    sameerz Networkin' Nut Member

Share This Page