1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WDS Problem - Need ifcondig help

Discussion in 'Tomato Firmware' started by canis, Mar 4, 2008.

  1. canis

    canis Network Guru Member

    I connected with WRT54G- Tomatoes 2 building by WDS, it works like a charme, like Tomato. All Clients are in the same subnet and everything worked fine.

    Now the 2nd Building has an own internet router in the basement with his own DHCP server (Both of them are working in different ranges), and now it depends on luck for the clients from which DHCP server the lease is gathered.

    So I tried a firewall script
    IPTABLES -A INPUT -p all -s 0.0.0.0 --sport 68 -d 255.255.255.255 --dport 67 -j DROP
    IPTABLES -A FORWARD -p all -s 0.0.0.0 --sport 68 -d 255.255.255.255 --dport 67 -j DROP
    to cut off the DHCP transmission on the WDS bridge, but this is not working.

    The Tomato on the roof of the 2nd Building has the WAN Port is unused.

    Question to Comminity: How can I assign the (internal) WLAN interface of this router to the WAN- port, so that the iptable- commands can be used?

    Thanks for all assistance.
     

Share This Page