1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WDS setup question

Discussion in 'Sveasoft Firmware' started by dnlhnmn, Oct 28, 2004.

  1. dnlhnmn

    dnlhnmn Network Guru Member

    I am trying to set up WDS to connect my two WRT54GS. Do I only have to put the Mac address of my 2nd AP in the WDS section of my 1st AP, or do both AP's have to have the MAC's of the other.

    Also, should both routers be set as AP's, or should 1 be set as a client?
  2. u3gyxap

    u3gyxap Network Guru Member

    Both routers in AP mode. Both routers having eachothers wireless MAC addresses in the WDS setup.
  3. PRJams

    PRJams Guest

    I'm also using Satori 4.0, which setting do we use for "Internet Connection Type" on the second WRT54G ("Disable" is not an option)? I have it as "Auto Config" but the link keeps dropping off after a short period of time and I need to recycle the power on the unit to re-establish the link.


Share This Page