1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WDS setup

Discussion in 'Tomato Firmware' started by ric3125, Jan 18, 2007.

  1. ric3125

    ric3125 Network Guru Member

    I just started using WDS and have three router. I have two hooked up and going. I have a question on the third. Do I put the mac address in one router(gateway) or do I have to do both. Thanks
     
  2. GeeTek

    GeeTek Guest

    I always put only the MAC address needed to establish the link. If radio 2 and 3 are WDS repeating radio 1, and both 2 and 3 can link to 1, then 2 and 3 should WDS only with radio 1. Radio 1 will of course have the MAC of 2 and of 3. If radio 3 is too far from radio 1 to link, and radio 2 is in the middle, radio 2 would link to 1 and 3 with 1 and 3 only linking to 2.
     

Share This Page