1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WDS & Tomato firmware - keeps disconnecting

Discussion in 'Tomato Firmware' started by jeroenzelle, Apr 22, 2008.

  1. jeroenzelle

    jeroenzelle Addicted to LI Member


    I've got 2 x an WRT54G v2.2 with Tomato 1.08. This weekend I have tried to set up both routers with WDS, and used the Tomato FAQ.

    Here's the text from the faq of Tomato:
    I've followed it exactly as said above, but after 1 or 2 minutes it doesn't connect anymore, and gives the error that there is limited connectivity (private ip address). After repairing the connection, it happens each time ...

    Can someone advise me what can goes wrong?

    Some settings:
    - Mixed b/g
    - DHCP enabled on router 1, disabled on router 2
    - WPA Personal with PSK
    - No MAC filter enabled

    Thanks in advance!
  2. jeroenzelle

    jeroenzelle Addicted to LI Member


    I've emailed the creator of the Tomato firmware, and got this reaction back:

    I will try to add the gateways to my ip settings tonight, maybe that helps.
  3. delajed

    delajed Addicted to LI Member

    I'm having the same issue...

    Have you solved the problem since then?

    I'm not sure how to set my computers to talk to router closes to them.

Share This Page