1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Web Server

Discussion in 'Other Linksys Equipment' started by carmar, Mar 30, 2005.

  1. carmar

    carmar Network Guru Member

    Hello, I have a WAG54G and I connect to Internet well. In my computer I have a web server, ftp server and mail server running ok (because before this linksys I have a USB-Modem running).
    Actually external acces to web server is not possible. I have open ports an nothing, I put the server in DMZ, and nothig too. I thought that was problem with DynDNS, but today I try to acces witch ftp and go well.
    In the server I have a firewall, but it has ports open (80, 21, 110, ..).

    Can anyone help me? Thanks!!
     
  2. DavidC

    DavidC Network Guru Member

    Are the open ports you refer to on the server firewall (I assume you mean a software firewall) or on the WAG? you must open ports in both the WAG and any software firewall you have running.
    It is probably easier to give the server a static IP address and use this address when port forwarding in the WAG.
     
  3. stefor

    stefor Network Guru Member

    Stupid question: have you forwarded the ports you have opened to your server IP ?
     
  4. carmar

    carmar Network Guru Member

    Yes I open ports on WAG and software firewall...
     
  5. HiSpeed

    HiSpeed Network Guru Member

    Hi

    Are you aware that Single Port Forwarding doesn't work with Wag ?
     
  6. carmar

    carmar Network Guru Member

    I don't know this... What can I do? Another possibility?

    Thanks!!
     
  7. DavidC

    DavidC Network Guru Member

    I think HiSpeed meant that single port forward has issues but you can use range forwarding to achieve the same. I am not aware of problems with range forwarding - but don't hold me to it!
     
  8. HiSpeed

    HiSpeed Network Guru Member

    Right !
    Only the Port Range Forwarding works in this case...
     
  9. booly

    booly Network Guru Member

    You can use the port triggering.

    You can test your config with web site that offer firewal test
     

Share This Page