1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WET - Computers don't get a DHCP Lease

Discussion in 'Tomato Firmware' started by Noell, Jan 14, 2007.

  1. Noell

    Noell LI Guru Member

    Hi,

    I have just upgraded my WRT54GL with the latest tomato firmware. :) The configured WET works okay when I ping the remote computers behind the WLAN. When I configure my computer with a static IP, DNS and GW everything works fine but when i want the DHCP-Server to assign the addresses on my computer the addresses stay blank (0.0.0.0).

    Does someone know what's going wrong?

    Noell
     
  2. GeeTek

    GeeTek Guest

    Is the GL the primary router ? What type of radio is the WET ? I have used Wireless Ethernet Bridge mode and it does allow connected clients to obtain by DHCP.
     
  3. Noell

    Noell LI Guru Member

    The GL which is working as WET is connected to an Access Point at my university. I don't know which type of AP they use. Security of the WLAN is disabled.
     
  4. GeeTek

    GeeTek Guest

    I'm not sure what to suggest next. I wouldn't think that W.E.B. mode could be brand/protocol specific. Seems like it would work the same with any brand of AP host. My testing was with 2 Tomato radios.
     

Share This Page