1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WET11 question

Discussion in 'Other Linksys Equipment' started by jama62, May 26, 2005.

  1. jama62

    jama62 Guest

    I have a V2 WET11 with firmware 2.08. I am trying to change my channel to anything other than 6 (the default) but the channel box is greyed out. Does anyone know how to fix this?
     
  2. NO4K

    NO4K Guest

    WET11 Channel

    From what I understand you can not change this channel manually.
    When you program an SSID for it to connect to the WET11 will search all channels for this SSID and will automatically change it's radio channel to the correct channel.
     
  3. sebehk

    sebehk Network Guru Member

    In Setup Screen, the "Network Type" pop-up menu, select "Ad-hoc" instead of "Infrastructure". That should un-grey the channel setting. Having it on "Infrastructure" makes the bridge auto-detect the channel being used to connect to a router (like WRT54G).

    --->Robert
    :cool:
     
  4. bigbloke

    bigbloke Guest

    Well - it seems theres a problem for european users

    Hi all,

    I recently bought 3 x WET-11 V2's as a precursor to buying >200 of them for a special project.

    I have the latest firmware, and they are EU versions.

    It seems that in infrastructure mode, these new V2's only support channels 1-11! tut tut Messrs Linksys !

    Hereabouts the 2.4Ghz band is so crowded we have to operate a 4 channel frequency reuse pattern (which you can do in Europe) based around channels 1,5,9,13. (as opposed to 1 6 11 in the US)

    I have spoken to Linksys tech support, they concur it is a "feature" and do not presently have a solution.

    So If you need to interwork with APs on channels 12 and 13 DO NOT BUY A WET11 V2 - presently they are "not fit for purpose" in the EU

    regards

    BB
     

Share This Page