What am i missing? WRT54GS v.4 related

Discussion in 'Cisco/Linksys Wireless Routers' started by lallous, Jan 5, 2006.

  1. lallous

    lallous Network Guru Member

    Hello,

    I was able to get ping responses by joining pin 15-16 with a screewdriver , I also did the arp procedure of adding the router's mac address (static) but when i try to install the linksys firmware here is what happens:

    C:\>tftp -i 192.168.1.1 put c:\code.bin
    Transfer successful: 2884608 bytes in 8 seconds, 360576 bytes/s
    (I also tried using the original filename instead of code.bin and still the same problem)


    Reply from 192.168.1.1: bytes=32 time=1ms TTL=100
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
    Reply from 192.168.1.1: bytes=32 time=1ms TTL=100
    Reply from 192.168.1.1: bytes=32 time=2ms TTL=100
    Reply from 192.168.1.1: bytes=32 time=2ms TTL=100
    Reply from 192.168.1.1: bytes=32 time=1ms TTL=100
    Reply from 192.168.1.1: bytes=32 time=1ms TTL=100
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.

    And i never get a ping again even after the router reboots after installing the new firmware

    My linksys firmware is the following:WRT54GSV4_1.05.2_US_code.bin
    My router is a WRT54GS V.4

    Any suggestions on what firmware to install other than linksys's firmware. Am i doing anything wrong?
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice