Discussion in 'Tomato Firmware' started by johnny2002, Nov 10, 2006.
On the current bandwidth diagram, what are br0/eth1/ppp0?
ppp = Point-to-Point Protocol (do you have dsl?)
eth = Ethernet
br = Bridge
Please correct me if I'm wrong.
br0 are your hardwired LAN connections, eth1 are your wireless connections, and ppp0 is your WAN connection or connection to the internet.
Br0 may not be hardwired LAN. I have no wired lan, but have almost same bandwidth data with ppp0
I got them from the log:
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 18.104.22.168 -- Should be the wan port
eth1: Broadcom BCM4320 802.11 Wireless Controller 22.214.171.124
br0: port 2(eth1) entering learning state -- br0 should be the bridge to lan