1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What firmware for bridging

Discussion in 'General Discussion' started by Anonymous, Sep 1, 2005.

  1. Anonymous

    Anonymous Guest

    Hi All,

    Need some advice on what firmware to put into a WRT54G V3.1 to use it as a bridge..
    They are curently running dd-wrt because me misread and was thinking it did bridging :p

    All info welcome
    Thanks
    Steve
     
  2. jgutz20

    jgutz20 Network Guru Member

    any of the sveasoft firmware will do wds
     
  3. Anonymous

    Anonymous Guest

    Adtional info

    Forgot to mention that i would like the router's 4 ports at the non-adsl connected end.
    Can that be done with WDS ?
    Thanks
    Steven
     
  4. uberGeek

    uberGeek Guest

  5. amitroy5

    amitroy5 Network Guru Member

    Is it possible to do this with a wireless B BEFW11S4? Thanks!
     
  6. Anonymous

    Anonymous Guest

    Thanks Ubergeek

    So i did not missread :p
    Thanks, thought i had seen it somewhere but later i could only locate info about the alfa version.
    Will try this

    Thanks again
    Steve
     

Share This Page