1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What's ND version?

Discussion in 'Tomato Firmware' started by johnny2002, Oct 11, 2008.

  1. johnny2002

    johnny2002 LI Guru Member

    I found from 1.19, there is an ND version. What's it?
     
  2. xjulzkx

    xjulzkx Addicted to LI Member

    The ND version of the Tomato firmware was designed so that people with WHR-G125 Router's can use the Tomato firmware. I would not suggest you use the ND firmware for any other router other than a Buffalo WHR-G125. You'll brick them if you do more than likely.
     
  3. Elanzer

    Elanzer Addicted to LI Member

    ND = New Driver (for wireless)

    Can't recall offhand which of the routers all support it, but it works great on WRT54GL.
     
  4. Mastec

    Mastec Network Guru Member

    I have the 1.21 ND version on my Asus, it's not bricked
     
  5. johnny2002

    johnny2002 LI Guru Member

    I have put it on my WRT54GS v1.1. Works fine. I think new driver should be better.
     
  6. Mastec

    Mastec Network Guru Member

    :thumbups:
     
  7. xjulzkx

    xjulzkx Addicted to LI Member

    Interesting, I should look into the ND Version a little more. I was having some what of a difficult time finding information about it.
     
  8. vexingv

    vexingv LI Guru Member

    I did that by accident on a linksys wrt-54g 1.1 by accident (downloaded the firmware and didn't noticed the ND designation) and a lot of the functionality was not working (dhcp wasn't working so the router was essentially useless). However, the ND version works great on my buffalo whr-g125.
     
  9. Edrikk

    Edrikk Network Guru Member

    I truely don't mean to be rude or flame you, but if you don't know much about it, then why would you say, with such conviction in your first post that the user should avoid it or it will brick his/her router?

    Wouldn't it be better to wait till others who may be more informed chime in instead? That way you'll learn the correct answer, and also not spread mis-information.
     
  10. Mastec

    Mastec Network Guru Member

    Wanted to come back and say that after thinking about that post... But you beat me to it. :thumbup:

    Cheers!
     

Share This Page