1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What's wrong with my Router...

Discussion in 'General Discussion' started by Vctr, Mar 15, 2005.

  1. Vctr

    Vctr Network Guru Member

    ... or with me?

    I have WRT54GS

    Lan setup:
    IP Address: 10.0.0.1
    Subnet Mask: 255.255.255.0

    I have two computer wire connected to two lan ports in it.

    When I run ping from 1 host connected to one port to another:
    > ping -c 100 10.0.0.10
    PING 10.0.0.10 (10.0.0.10) 56(84) bytes of data.
    64 bytes from 10.0.0.10: icmp_seq=1 ttl=255 time=2.92 ms
    64 bytes from 10.0.0.10: icmp_seq=2 ttl=255 time=2.38 ms
    [...]
    64 bytes from 10.0.0.10: icmp_seq=100 ttl=255 time=4.87 ms

    --- 10.0.0.10 ping statistics ---
    100 packets transmitted, 100 received, 0% packet loss, time 99961ms
    rtt min/avg/max/mdev = 0.877/3.431/5.957/1.476 ms

    I dont see not a single lost packet. However in the same time when I ping from the same computer my router:
    >ping -c 100 10.0.0.1
    PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
    64 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=1.53 ms
    64 bytes from 10.0.0.1: icmp_seq=4 ttl=64 time=1.27 ms
    [...]
    64 bytes from 10.0.0.1: icmp_seq=99 ttl=64 time=0.970 ms
    64 bytes from 10.0.0.1: icmp_seq=100 ttl=64 time=0.996 ms

    --- 10.0.0.1 ping statistics ---
    100 packets transmitted, 76 received, 24% packet loss, time 99322ms
    rtt min/avg/max/mdev = 0.909/1.145/6.119/0.740 ms

    I have about 25% of lost packets.
    It's not always the same value it could vary from 10 to 30%, but never 0.
    For me this is very strange because pings packets from one comp to another actually going trough the router as well.

    Maybe router is too busy to answer (how to figure it out?)
     

Share This Page