1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Which Firmware for my wrt54gs with s/n:CGN60EC1? Please help

Discussion in 'Sveasoft Firmware' started by toadstul, Jan 25, 2006.

  1. toadstul

    toadstul Network Guru Member

    hello there
    I have buy a wrt54gs v4 with s/n:CGN60EC11743
    Can someone tell me please if i can upgrate it with sveasoft firmware?
    If yes wich version of svea firmware must i use?
    I have try the FreemanBasic_V1.0.4_wrt54gs but upgrade was not succided
    Thanks
     
  2. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    You have a WRT54GS 4.0 as confirmed on the autopsy page http://www.linksysinfo.org/modules.php?name=Content&pa=showpage&pid=6. Sveasoft TalismanBasic 1.1 supports this version. "Freeman" which is not a sveasoft release and does not support your version. Alchmey 1.0 (Public) does not support this model either. You do have other distros that support your model as well.
     
  3. toadstul

    toadstul Network Guru Member

    thanks for your reply
    do you have any link where i can find this firmware?
     
  4. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    All publicly available 3rd party firmware is located in the downloads section http://www.linksysinfo.org/modules.php?name=Downloads. If you want Talisman, you'll have to register at http://www.sveasoft.com and pay for the yearly support subscription of $20 USD.

    Have a look at dd-wrt, openwrt, tofu, hyperwrt (just to name a few)
     
  5. yocobs

    yocobs Network Guru Member

    well you mean the wrt54gs v4 cant have the satori or alchemy v7?
     
  6. __spc__

    __spc__ Network Guru Member

    Get yourself free DD-WRT; I'm using v23 successfully in WDS mode acorss to WRT54G.

    Make sure you read the FLASH instructions first, as the v4 WRT54G has a limitation compared to its predecessors that requires it to be flashed with a'mini' version of the firmware, before being flashed with the full version.

    Well worth the effort, and my FLASHes went as smoothly as you could expect.

    (Don't forget to donate to the author though..!)
     
  7. NateHoy

    NateHoy Network Guru Member

    toadstul -

    That router will also work well with HyperWRT Thibor, if you want another free alternative.
     
  8. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Satori and Alchemy(public version 1) are old. Like others have posted you could probably get what you want out of other 3rd party without using Sveasoft. Comes down to do you want to pay for support or rely on the community like this one for support? Really there are many good versions out there feature rich and well supported in the community. For a quick list read the firmware tracker http://www.linksysinfo.org/modules.php?name=Content&pa=showpage&pid=35
     

Share This Page