1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Which firmware is the best to use as a wireless bridge

Discussion in 'General Discussion' started by Bradleyscott, Jan 24, 2005.

  1. Bradleyscott

    Bradleyscott Network Guru Member

    I have two WRT54G routers. One is upstairs and I am getting ready to install one downstairs. Unfortunately, I am in a rented house so I am not allowed to install an RJ 45 cable between the two.

    I started thinking there should be a way to connect the two wirelessly so that all of the LAN outlets on the back of both routers work. I need it this way because I have a TiVo and PS2 in both locations. I also need the WAN to work as well because we have two laptops in the house.

    The biggest question I have now is, which firmware is the best one to use to get this feature installed.

    Thanks,

    Brad
     
  2. jagboy

    jagboy Network Guru Member

    you might want to use alchemy or satori.
     
  3. Bradleyscott

    Bradleyscott Network Guru Member

    Thank you, I think I will try Satori first and if it doesn't work out I will try Alchemy.
     

Share This Page