1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Which Linksys Router do you recommend?

Discussion in 'General Discussion' started by Toxic, Nov 26, 2006.

  1. Toxic

    Toxic Administrator Staff Member

    Ok guys just a quick reply will doon this. I want to recommend a few linksys devices to newbies here so any recommendations as to what Linksys hardware to use would be greatly appreciated.

    OK here's my list of recommendations, they need to be in production and not old devices.

    WRT54GL v1.x
    WRTSL54GS v1.0
  2. mazilo

    mazilo Network Guru Member

    For ATA devices, I would recommend a Linksys PAP2T-NA. Both PAP2T and PAP2v2 are the new replacements for a long been discontinued PAP2v1. If there is not much differences in prices between a PAP2v1 and a PAP2T, it will be best to get a PAP2T that has more Flash/RAM than a PAP2v1. As with a PAP2v2, its firmware currently doesn't support STUN options, let alone its firmware is full of bugs, i.e. numerical CID Name, very unstable with both lines enabled, etc.
  3. windage

    windage Network Guru Member

    The router to do it all would be the wrtsl54gs. Best bang for the buck and very easy to setup with thibor. Processor speed is faster then alot of the other boxes and seems to be very stable.

Share This Page