1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wifi with no security, OpenVPN used to access network/internet

Discussion in 'Tomato Firmware' started by Delta221, Dec 13, 2009.

  1. Delta221

    Delta221 Addicted to LI Member

    Any thoughts on how I can do the following with ONE router?

    - Have a router with TomatoVPN which has wifi enabled, with no security (I got this far)
    - Don't give computers access to anything or anyone on the network, until they connect through the OpenVPN server on the router, which is the only port/service which non-authenticated users have access to.
    - Kick off users who don't authenticate within 90 seconds, and ban their MAC address for 5 minutes. (If this is too complicated, I can get by with the Wireless Client Filter).
    - After connecting through OpenVPN with a certificate (one certificate for all with the duplicate-cn option), the user will have access to everything via the tap tunnel (get an ip on the VPN range, access the network/internet, etc) as would normally happen if someone connected to the wifi network with a password.


Share This Page