1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

will these antennas work with a wrt54GL?

Discussion in 'Cisco/Linksys Wireless Routers' started by kent_kurt, Jun 26, 2007.

  1. kent_kurt

    kent_kurt LI Guru Member

  2. Slimey

    Slimey Network Guru Member

    You need one with RP-TNC antenna connectors instead for the WRTs.
  3. kent_kurt

    kent_kurt LI Guru Member

    Thanks for your reply,
    If I find a converter or adapter to RP-TNC, could they work?
  4. u3gyxap

    u3gyxap Network Guru Member

  5. kent_kurt

    kent_kurt LI Guru Member

  6. HennieM

    HennieM Network Guru Member

    Have you tested? Over 150m you may not need 14dBi antennas (except if you perhaps are trying to go through a lot of walls, or trees, or something).
  7. ra0ultortugas

    ra0ultortugas LI Guru Member

    This antenna has dual RP-TNC leads:

    2.4 GHz 11 dBi Wireless LAN Dual Cable Spatial Diversity Flat Patch Range Extender Antenna[/B]

    Its from Sharper Concepts. I have heard they have good products.

    I have dealt with them only once. If you need any tech info they are far from sharp. Totally devoid of customer service.


Share This Page