1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wireless client does't work

Discussion in 'Tomato Firmware' started by Stimpoff, Dec 23, 2008.

  1. Stimpoff

    Stimpoff Addicted to LI Member

    Hello,
    Yesterday I bought new router WL500gp v1 because my old wl500gx isn't supported by Tomato fw. I have problem with wireless client setup. I am quite sure that my setting is ok. But it simply doesn't work. When I switch into client mode than router isn't able to lease IP adress from DHC server. If I set it as static overview window says in WAN section "disconnected" it seems that WAN dissapered i.e. it is not bridged with WLAN. I found similar issues in phorums but without answers. Strange thing is that MAC adress of LAN and WLAN are the same. I thing thet problem will be in NVRAM setting. Starnge is when I change something in NVRAM and commit then after reboot is is everything as before i.e. Wan_xxxx=eth2 (wl is eth1) I tried to solve it for many hours but without any progress. I bought this router because I want to have tomato and this router is in list of supported devices. Could you help me please?
     

    Attached Files:

  2. Stimpoff

    Stimpoff Addicted to LI Member

    I got new version from author. It is OK now
     

Share This Page