1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wireless Client Mode (STA) on dual band router

Discussion in 'Tomato Firmware' started by mercurio_, Oct 18, 2013.

  1. mercurio_

    mercurio_ Reformed Router Member

    Does someone have a dual band (2GHz4 / 5GHz) router running tomato in client mode (STA)?

    I'm trying and so far i'm not sure whether it's a driver problem on the AC66U or a tomato bug.

    So knowing whether it works at all on a dual band router would help me finding the problem.
  2. shibby20

    shibby20 Network Guru Member

    No working for me too.

    Little test:
    RT-N66U with tomato RT-N = STA does not work
    RT-N16 with the same tomato version = STA is working correct

    It`s not a router`s problem or WL driver. IMO it`s tomato bug but i didn`t find a fix yet.
  3. mercurio_

    mercurio_ Reformed Router Member

    shibby thanks a lot for testing. if the problem is due to some bug in tomato i have one hint:

    from all the tests i did (comparing a build for the ac66u to a e1200v2 / e900) it seemed that somehow the wrong passkey was used (the ac66u behaves like an e900 with wrong passkey). i checked and the correct one is stored in the nvram, so no idea what's happening. but maybe you know.

Share This Page