Hello, I would like to setup a RT-N66U as a wireless repeater for my office. My apartment is just in the upper floor, and I would like to take advantage of the internet connection from my home router. I can't put a cable between them two. I would like to configure the RT-N66U as a Client from my current wireless SSID from home. At same time, I would like to create a virtual wireless SSID for the office, different network, so office computers are able to connect to internet but are isolated from the home network. Could anyone point me to this configuration? So far I've been able to connect as a client, and create an SSID with another network. I have two different LAN ports assigned to each bridge. LAN1 --> br0 --> 192.168.0.x LAN2 --> br1 --> 10.0.0.x HomeWireless --> br0 OfficeWireless --> br1 If I connect to LAN1, I have access to internet and get DHCP from internet router. If I connect to LAN2, I have NO access to the internet, and get DHCP from RT-N66 If I connect to HomeWireless, same happens as connected to LAN1 If I connect to OfficeWireless, same happens as connected to LAN2 I'm stuck into getting br1 access to internet. I think it might be, because WAN port is not being used and VLAN's seem to be isolated by default... but no idea how to solve it. Help is appreciated.