1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wireless-G Print Server : I fogot my PASSWORD!! HELP!

Discussion in 'General Discussion' started by karmakazi, Apr 27, 2005.

  1. karmakazi

    karmakazi Network Guru Member

    I need to re-configure my print server, but I keep being prompted for a password. I don't remember ever setting one. How do I get around this?!
    VERY FRUSTRATING!!
     
  2. Guyfromhe

    Guyfromhe Network Guru Member

    i'm not farmiliar with this product but most linksys devices have a little reset hole on them that you can use to reset to factory detaults, see if thats there..
     
  3. deeps

    deeps Network Guru Member

    Reset the Print server for 20 sec.. unplug & replug the Power to print server... Configure it again...

    :wink:
    Cheers...
    Deepak
     
  4. karmakazi

    karmakazi Network Guru Member

    Thanks, but...

    That was the 1st thing I tried, no effect.
     
  5. Guyfromhe

    Guyfromhe Network Guru Member

    does the device restart when you press the button down?
     
  6. karmakazi

    karmakazi Network Guru Member

    still no luck

    Just tried that. It looked like it was working (extra lights flashed when I plugged it back in) but still asking 4 a password. AARRGH!!
     
  7. Guyfromhe

    Guyfromhe Network Guru Member

    did you try the default pw?
    the default for the wrts is nothing for username and pw of admin...
    look for a doc for that unit on the linksys site and that should tell you the default
     
  8. Guyfromhe

    Guyfromhe Network Guru Member

    also you have to do the 30 second reset with the power on...
     

Share This Page