Wireless N Settings, Channels, Etc - NEWBIE!

Discussion in 'Other Linksys Equipment' started by mortgage_it, Nov 11, 2008.

  1. mortgage_it

    mortgage_it Addicted to LI Member

    Hello everyone! 1st post here! I don't see a specific forum for the linksys 310n wireless N router so here goes...!

    Need help understanding what my best settings should be in the wireless setup config page at 192.168.1.1

    Do I want: Auto, Wide - 40mhz, or Standard - 20mhz?
    I have 1 laptop with N card and 1 laptop with G card on the system.
    What is the difference in the above options? Pro's and con's of each?
    Also, what is the best setting for "Basic Rate" - "Default" or "Auto"
    What are pro's and con's of either setting?

    Many thanks everyone!
     
  2. atinexus

    atinexus Network Guru Member

    With the wireless G lappy in the mix you gonna need to set your router for Mixed Mode and everything else just leave auto... i think that'll cap your N speed to 65mbps but you can still use your G lappy at 54mbps.
     
  3. mortgage_it

    mortgage_it Addicted to LI Member

    many thanks. if i leave the g lappy out of the mix and only have the n lappy. what would you suggest? thanks.
     
  4. atinexus

    atinexus Network Guru Member

    to go with N only set to Wide 40mhz and everything else auto should pull better than 135mbps :)
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice