I recently had to bin my Linksys WAG54 as it was playing up badly. I bought a Linksys WAG300N to replace it and I'm having a little trouble setting it up. I have got the pc and laptop up and running fine the problem i'm having is getting them to connect to the printer (HP2710). The printer worked no problem at all with the old router. The printer connects to the router no problem and I can ping it from the router diagnostics no problem. It wont reply to being pinged from the laptop or the pc though and neither can I get into the printer settings from my web browser. I have set the radio band to Standard 20MHz on the router all wireless equipment running on channel 4. Turned off the firewall to see if that was causing problems but it still wouldn't connect. Anyone got any ideas what's wrong? All help would be greatly appreciated.