1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wireless Speed Differences

Discussion in 'Tomato Firmware' started by careh, Dec 25, 2012.

  1. careh

    careh Networkin' Nut Member

    I have a Cisco E2000 router running Tomato Firmware v1.28.7475 MIPSR2-Toastman-RT K26 Std and a Cisco Valet M-10 configured as a WDS access point running Tomato Firmware v1.28.7500 MIPSR2Toastman-RT K26 VLAN-Std

    Both are configured to Wireless Network Mode 'Auto' and my laptop has a N speed card in it. When I connect to the M-10 I get a wireless transmit rate of 104-117 Mbps. When I connect to the E2000 I only see 54 Mbps. Both devices are within 10 feet of me.

    When I run speedtests I get faster speeds when connected to the M-10. I am wondering if I were to update the firmware in the E2000 if that would increase the speed. I hesitate to do so as the present firmware runs rock solid.
  2. careh

    careh Networkin' Nut Member

    I found it. On the E2000 I had previously turned on 'Advanced - Wireless' Afterburner to 'Auto'. Setting it to the default of 'Disabled' boosted my transmit rate to 144 Mbps.

Share This Page