1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wish for VoIP-Version DD-WRT V23

Discussion in 'DD-WRT Firmware' started by Honki, Oct 14, 2005.

  1. Honki

    Honki Network Guru Member

    Hey Brainslayer,

    i would like to bind a second LAN-IP on RTP-Proxy.

    with "ifconfig br0:1 10.0.0.1 netmask 255.255.255.0" a SER-Prozess is started, but the second LAN IP on RTP-Proxy is not there. RTP need this IP to Proxy the VoIP-Clients in this 2nd LAN-Net.

    Can You help or is it a wish to send it the SIPatH-Boys?

    Thanks and GREAT work! :thumb:
     
  2. Honki

    Honki Network Guru Member

    Anybody there? :sadbye:

    can i do it with iptable? - 192.168.0.1 map to 10.0.0.1 ???
     
  3. Honki

    Honki Network Guru Member

    Nobody understand me.. :sad:
     
  4. BrainSlayer

    BrainSlayer Network Guru Member

    sure you can do it with iptables, but why. just connect the internet on the wan port and thats all
     
  5. Honki

    Honki Network Guru Member

    From the second Subnet on br0:1 the VoIP Login will not work. You can see it on SIPatH Login-Page, there isn´t one when you come from br0:1. This will only work when you are in the first Subnet on br0.
     
  6. BrainSlayer

    BrainSlayer Network Guru Member

    then your routing seems to be incomplete. why should it work on 1 net and not on the second. the router makes no difference between these routes. check all gateway settings and routing entries on your network
     
  7. Honki

    Honki Network Guru Member

    I think is a Config-Problem on RTP-Proxy with br0:1, because the second LAN-IP is not visible in SIPaTH-Page under RTP, also i thonk no VoIP-Routing over br0:1, too.
     
  8. canis

    canis Network Guru Member

    As far as I tested here, SER had bound 5060 to vlan1 only - correct?
    (What could be logical to override QoS) (sorry, I had to correct me)
     
  9. Honki

    Honki Network Guru Member

    yes, you are right!

    I think it´s a RTP-Proxy problem, because this is bind on br0 for LAN-Side and not on vlan1.

    Any ideas for solution?
     
  10. BrainSlayer

    BrainSlayer Network Guru Member

    the rtp proxy is just configured for br0. thats right. you possibly need to start a second one
     
  11. Honki

    Honki Network Guru Member

    Hey Brainslayer,

    i did this with "rtpproxy 10.0.0.1" and now i can see the second Subneton the SIPath page, but a VoIP-client on this net will not work. there is no registration on the SIPatH Page.

    Do you have any Ideas?
     

Share This Page