1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wl gmode afterburner

Discussion in 'Tomato Firmware' started by silverchariot, Jan 27, 2009.

  1. silverchariot

    silverchariot LI Guru Member

    Does anyone know why mode 6=afterburner is not available in Tomato 1.23ND version?

    These are the only options that I got:

    # wl gmode afterburner
    gmode Set the 54g Mode (LegacyB|Auto||GOnly|BDeferred|Performance|LRS)

    Any help is much appreciated. Thanks.
  2. teddy_bear

    teddy_bear Network Guru Member

    What about
    # wl afterburner
  3. silverchariot

    silverchariot LI Guru Member

    wl afterburner shows 0 if I set Afterburner -> Auto under Advanced Wireless page.

    wl afterburner shows 1 if I set Afterburner -> Enable.

    No wireless performance difference is observed under either setting, with transfer (downstream from router to PC) maxing out at around 24Mbps.

    Any idea? Or am I expecting too much. The smallnetbuilder review suggest that WRT54GS with Speedbooster is capable of around 33Mbps (http://www.smallnetbuilder.com/content/view/24649/96/1/8/).

    I want to get the max out of the wireless link in order to utilize my newly installed 30Mbps VDSL connection. :biggrin:

Share This Page