1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wlan slowwwwwww

Discussion in 'HyperWRT Firmware' started by mikele, Mar 19, 2006.

  1. mikele

    mikele Network Guru Member

    Internet connection WRT54GS v2 with Thibor 12 is so fast with wirelessed computer AES+WPA2 and so slowwww with wired computer RJ cable connected to the router... very slow also when I reach the router (
    Specialy I think since I installed XP sp2 but so slow before sp2 too...

    I mean I have 10mbit extreme cable connection and my wired computer is so slow compare to my wirelessed one. If I try without router connection, like direct modem cable wired it's ok

    Any idea (I DO NOT have xp firewall or any other)
    any tweaking on the router ?

  2. mikele

    mikele Network Guru Member

    I reply myself because I found the EvID4226Patch.exe issue and this help my problem a lot (for internet web surf only, not to reach router web interface so slowwwww, https or
  3. jgutz20

    jgutz20 Network Guru Member

    possibly QOS limiting the port?
  4. d00mzday

    d00mzday Network Guru Member

    Im guessing you are saying your wireless is nice and fast but your wired computer is slow and if u plug it directly in to your modem it becomes fast? If you are talking in general and no p2p involved then -

    Try doing a nvram and factory default reset and see if your wired connection is still slow before you setup the rest of your router(incase any settings that may be causing it). If it is then try plugging it into other ports. If your wired connection is still responding slow you could likly be having a negotiating problem between your nic and your router. You could then try going into your card network settings in windows networking and try setting it from auto to 100+full duplex or to auto if your card is already set at that. Possibly even try a diffrent brand of card sometimes you can run into the odd card that will be picky with a switch. Possibly check your cabling to. Hope I understood you correctly.
  5. mikele

    mikele Network Guru Member

    I will try soon but I think the patch help my problem...

Share This Page