1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Working Firmwares.

Discussion in 'Other Linksys Equipment' started by Aleks, Jul 26, 2004.

  1. Aleks

    Aleks Network Guru Member

    Hello.

    As you may guess, i am another guy who in the moment is promissing not to buy Linksys again.

    I bought a WAG54G, and could't sleep again. The wireless link goes down after some time (between 10 and 30 minutes), and only comes back with a reboot.

    After searching the net, I found out that the problem wasn't only mine, and tried everything people suggested in this forum.
    Tried with/without WEP, with/without firewall, changed the default SSID, factory reset... And as last resort, firmware upgrade.

    The unit came with firmware 1.01.6, so I tried not to mess with it, because people said it was the more stable, but eventualy i upgraded to 1.02.3. Didn't work either.

    So i had this thought. Can the people who managed to put their unit working with only firmware upgrades/downgrades post the working configuration, so we could see what probably is the best match? Kind of a statistic... And another thind we can find out with this is if our unit is broken or not. Imagine firmware 1.02.3 works for everybody. If it doesn't work for someone, tha person knows it is more probable to be a hardware issue. I know there is a forum just for this, but there are no votes, and it is only for official releases, and i don't mind an unofficial release to solve the problem. :)

    Best wishes.

    My non working config:
    Workstations: D-link G520+
    Laptop: Linksys WPC54G
    O.S: Windows XP Home
    Modem/Router: WAG54G
    WEP: 64bit
    WAN: PPPoE
    Firmware:
    1.01.6 - Not Working.
    1.02.3 - Not Working.
     
  2. SloppyFredFloppy

    SloppyFredFloppy Network Guru Member

  3. Aleks

    Aleks Network Guru Member

    Hello.

    Thanks for the support, but allready tried that, and didn't work.
    The problem isn't the client getting disconected. The problem is that signal dissapears. And with diferent cards.

    But do you have a WAG54G? What is your config?

    Best regards.
     
  4. hiddensphinx

    hiddensphinx Network Guru Member

    There is a Hotfix for this which is on the XP SP2 Beta CD. I have it. You can also download the XP SP2 Beta from Microsoft.

    http://windowsbeta.microsoft.com/xpsp2/xpsp2_express.aspx

    http://windowsbeta.microsoft.com/download/dl3.asp

    Microsoft: A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that is described in this article. Only apply it to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, Microsoft recommends that you wait for the next Windows XP service pack that contains this hotfix.


    http://support.microsoft.com/default.aspx?scid=kb;en-us;828940
     
  5. yonnage

    yonnage Network Guru Member

    hardware failure?

    I would think its a hardware failure, seems like the wireless is dropping out on the unit because its happening with multiple clients, and multiple wireless cards
     

Share This Page